Hydrothermal alteration and tectonic evolution of an intermediate- to fast-spreading back-arc oceanic crust: Late Ordovician Solund-Stavfjord ophiolite, western Norway

Abstract The Solund‐Stavfjord ophiolite complex (SSOC) in western Norway represents a remnant of the Late Ordovician oceanic lithosphere, which developed in an intermediate‐ to fast‐spreading Caledonian back‐arc basin. The internal architecture and magmatic features of its crustal component suggest that the SSOC has a complex, multistage sea floor spreading history in a supra‐subduction zone environment. The youngest crustal section associated with the propagating rift tectonics consists of a relatively complete ophiolite pseudostratigraphy, including basaltic volcanic rocks, a transition zone between the sheeted dyke complex and the extrusive sequence, sheeted dykes, and high‐level isotropic gabbros. Large‐scale variations in major and trace element distributions indicate significant remobilization far beyond that which would result from magmatic processes, as a result of the hydrothermal alteration of crustal rocks. Whereas K₂O is strongly enriched in volcanic rocks of the extrusive sequence, Cu and Zn show the largest enrichment in the dyke complex near the dyke–volcanic transition zone or within this transition zone. The δ¹⁸O values of the whole‐rock samples show a general depletion structurally downwards in the ophiolite, with the largest and smallest variations observed in volcanic rocks and the transition zone, respectively. δ¹⁸O values of epidote–quartz mineral pairs indicate 260–290°C for volcanic rocks, 420°C for the transition zone, 280–345°C for the sheeted dyke complex and 290–475°C for the gabbros. The ⁸⁷Sr/⁸⁶Sr isotope ratios show the widest range and highest values in the extrusive rocks (0.70316–0.70495), and generally the lowest values and the narrowest range in the sheeted dyke complex (0.70338–0.70377). The minimum water/rock ratios calculated show the largest variations in volcanic rocks and gabbros (approximately 0–14), and generally the lowest values and range in the sheeted dyke complex (approximately 1–3). The δD values of epidote (?1 to ?12‰), together with the δ¹⁸O calculated for Ordovician seawater, are similar to those of present‐day seawater. Volcanic rocks experienced both cold and warm water circulation, resulting in the observed K₂O‐enrichment and the largest scatter in the δ¹⁸O values. As a result of metal leaching in the hot reaction zone above a magma chamber, Zn is strongly depleted in the gabbros but enriched in the sheeted dyke complex because of precipitation from upwelling of discharged hydrothermal fluids. The present study demonstrates that the near intact effect of ocean floor hydrothermal activity is preserved in the upper part of the SSOC crust, despite the influence of regional lower greenschist facies metamorphism.     

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.     

Diopside and Magnetite Exsolutions in Olivine from Lower Cr# Dunite in the Dongbo Ophiolite, Southern Tibet

<正>Diopside and magnetite exsolutions occur as oriented intergrowths within olivine of the lower Cr~#dunite in the Dongbo ophiolite,Tibet.The fresh lower Cr~#dunite has a mineral assemblage of olivine,spinel and diopside.The Fo content of its olivine is 90–92,which is lower than that of the higher Cr~#dunite lenses(Fo92-Fo94)without     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

Age and petrogenesis of plagiogranite intrusions in the Ankara mélange, central Turkey

Abstract   The Ankara mélange within the Izmir–Ankara–Erzincan suture zone in north-central Turkey includes ophiolitic fragments that represent the remnants of an oceanic basement evolved between the Sakarya and Kirsehir continental blocks in the early Mesozoic. The serpentinized upper mantle peridotites and lower crustal rocks in these ophiolites are cross-cut by dolerite and plagiogranite dykes, which show mutually intrusive relations indicating their synchronous emplacement into the pre-existing oceanic lithosphere. Zircon dating (U–Pb) of a plagiogranite dyke has revealed a concordia age of ∼179 ± 15 Ma that is interpreted here as the crystallization age of this differentiated rock. A fourth fraction of the zircon separates from this rock has also shown an inherited component greater than 1.7 Ga, possibly derived from the Precambrian core of the Rhodope–Strandja Metamorphic Massif in the Balkan Peninsula. Models for plagiogranite formation were tested and it is concluded that a high extent (<70%) of anhydrous or water-undersaturated, early amphibole-free fractionation of a basaltic melt source may have readily produced the observed REE concentrations for the Ankara mélange plagiogranites. The trace element abundances and other geochemical features of the coeval dolerite dykes are similar to those of the plagiogranites, suggesting a common melt source. The Ta–Nb patterns shown by both the plagiogranite and dolerite dykes are typical of arc-related petrogenesis and can be explained by the addition of slab-derived components to a depleted mantle wedge. The Early Jurassic ophiolitic basement and the dyke intrusions were formed in a back-arc setting between the Paleo- and Neo-Tethyan domains in the eastern Mediterranean region. The Izmir–Ankara–Erzincan Sea developed in this back-arc environment and the related suture zone had a diachronous evolutionary history.     

A new approach to the evaluation of water-pressure test results obtained in bedrock by the US Bureau of Reclamation Method

As is known, the permeability coefficient of saturated and unsaturated rock masses can be found using the Bureau of Reclamation Method, which uses single and double packer water-pressure test results obtained from drillholes. The Bureau of Reclamation Method is, however, a time-consuming processes.

In this study, a new graphical method that does not necessitate the procedures mentioned above is proposed for the determination of the coefficient of permeability. This graphical method has been prepared with the idea that the amount of water injected into the testing section increases as the permeability of the rock mass increases. If the amount of average water loss in a 2-m test section is known, the average permeability coefficient of this section can be found using the proposed graphical method.     

Field and geochemical characteristics of the Mesoarchean ( 3075 Ma) Ivisaartoq greenstone belt, southern West Greenland: Evidence for seafloor hydrothermal alteration in supra-subduction oceanic crust

The Mesoarchean (ca. 3075 Ma) Ivisaartoq greenstone belt in southern West Greenland includes variably deformed and metamorphosed pillow basalts, ultramafic flows (picrites), serpentinized ultramafic rocks, gabbros, sulphide-rich siliceous layers, and minor siliciclastic sedimentary rocks. Primary magmatic features such as concentric cooling-cracks and drainage cavities in pillows, volcanic breccia, ocelli interpreted as liquid immiscibility textures in pillows and gabbros, magmatic layering in gabbros, and clinopyroxene cumulates in ultramafic flows are well preserved in low-strain domains. The belt underwent at least two stages of calc-silicate metasomatic alteration and polyphase deformation between 2963 and 3075 Ma. The stage I metasomatic assemblage is composed predominantly of epidote (now mostly diopside) + quartz + plagioclase ± hornblende ± scapolite, and occurs mainly in pillow cores, pillow interstitials, and along pillow basalt-gabbro contacts. The origin of this metasomatic assemblage is attributed to seafloor hydrothermal alteration. On the basis of the common presence of epidote inclusions in diopside and the local occurrence of epidote-rich aggregates, the stage I metasomatic assemblage is interpreted as relict epidosite. The stage II metasomatic assemblage occurs as concordant discontinuous layered calc-silicate bodies to discordant calc-silicate veins commonly associated with shear zones. The stage II metasomatic assemblage consists mainly of diopside + garnet + amphibole + plagioclase + quartz ± vesuvianite ± scapolite ± epidote ± titanite ± calcite ± scheelite. Given that the second stage of metasomatism is closely associated with shear zones and replaced rocks with an early metamorphic fabric, its origin is attributed to regional dynamothermal metamorphism. The least altered pillow basalts, picrites, gabbros, and diorites are characterized by LREE-enriched, near-flat HREE, and HFSE (especially Nb)-depleted trace element patterns, indicating a subduction zone geochemical signature. Ultramafic pillows and cumulates display large positive initial ε_Nd values of + 1.3 to + 5.0, consistent with a strongly depleted mantle source. Given the geological similarities between the Ivisaartoq greenstone belt and Phanerozoic forearc ophiolites, we suggest that the Ivisaartoq greenstone belt represents Mesoarchean supra-subduction zone oceanic crust.     

Metamorphism of the Central Anatolian Crystalline Complex, Turkey: influence of orogen-normal collision vs. wrench-dominated tectonics on P–T–t paths

The Central Anatolian Crystalline Complex (CACC) is a microcontinent in the Alpine–Himalayan belt. It has previously been considered as a coherent structural entity, but, although the entire CACC is comprised of similar rocks (primarily metasedimentary rocks and granitoids), it consists of at least four tectonic blocks characterized by different P–T–t paths. These blocks are the K?r?ehir (north‐west), Akda? (north‐east), Ni?de (south) and Aksaray (west) massifs. The northern massifs experienced thrusting and folding during collision and were slowly exhumed by erosion; metamorphic rocks are characterized by clockwise P–T paths at moderate P–T and local low‐P–high‐T (LP–HT) overprinting in the highest grade rocks. Apatite fission track ages are Eocene to Oligocene (47–32 Ma). The Aksaray block represents the hot, shallow mid‐crust of a Late Cretaceous–early Tertiary arc. It is dominated by intrusions; rare metapelitic rocks record low‐P (< 4 kbar) regional metamorphism overprinted by LP–HT contact metamorphism. Apatite fission track ages are 50–45 Ma. The Ni?de massif is different from the other CACC blocks because it evolved as a core complex in a wrench‐dominated setting. It is characterized by clockwise P–T paths at moderate P–T followed by widespread LP–HT metamorphism. Apatite fission track ages are Miocene (12–9 Ma), significantly younger than those in the northern massifs. Ni?de rocks resided in the mid‐crust at a time when the rest of the CACC was at or near the Earth's surface. Variations in P–T–t and tectonic histories — especially timing of exhumation — between the northern and southern CACC reflect the difference between head‐on collision vs. mid‐crustal wrenching.